RF management

Market

The delay for switching the working channel of a radio to the channel configured by the administrator can be configured:

l  The dfs adjustment back delay minutes radio radioid command is used to configure the delay for switching the working channel of a radio to the channel configured by the administrator.

l   The { no | default } dfs adjustment back delay radio radioid command is used to restore the default configuration.

eWeb

Market

Half-time zone settings are supported.

5 GHz/6 GHz switching configuration is supported.

Internationalization

Market

6 GHz channel specifications for the Arab Republic of Egypt, the Republic of Indonesia, and the Socialist Republic of Viet Nam are added.

5 GHz channel specifications for the Sultanate of Oman and the Republic of Kazakhstan are added.

AP upgrade

Market

The packet retransmission interval during AP upgrade can be adjusted.

l  In the ap-download retransmission num1,num2,… command, the value of num is changed from multiples of 0.5 to multiples of 1.

Authentication

Market

The number of authentication-free URLs for domain name bypass is changed from 50 to 100.

1446143

[QC 166062] During execution of the show running-config command, occasional data exceptions in the metrics process traversal causes the process to be suspended. As a result, AC configurations cannot be delivered to the AP.

AC_RGOS 11.9(6)W3B1,

Release(10231312)

1449793

[QC 166568] When user basic information is being reported to Ruijie Cloud, multiple retry failures may exceed the service-defined timeout. In this case, user basic information may fail to be reported and user information cannot be queried on Ruijie Cloud.

AC_RGOS 11.9(6)W5,

Release(12152822)

1450066

[QC 166318] In the scenario where web-based authentication and MAB are used, the time sequence issue occurs occasionally during cross-WLAN authentication. As a result, MAB fails and the authentication page is displayed.

AC_RGOS 11.9(6)W3B1,

Release(11200519)

1450319

[QC 165902] In VAC scenarios, when the WIS address is configured as the HTTP address and two active/standby switchovers are performed, online AP and user information cannot be displayed on WIS.

AC_RGOS 11.9(6)W4B1T8,

Release(11230418)

1453844

When 802.11kv roaming enhancement is enabled and the roaming sensitivity mode is set to high, the AC and eWeb may be suspended.

AC_RGOS 11.9(6)W5,

Release(12152821)

1453847

[QC 165083] When the number of AP switching records for a client exceeds 100, a defect in the program's update logic may cause the show 802.11kv all-bstms command to display incomplete client information.

AC_RGOS 11.9(6)W5,

Release(12152821)

1456711

Due to variable initialization exceptions, the AC displays the "sta-limit 64" message, and any additional STAs beyond the specified limit cannot go online.

AC_RGOS 11.9(6)W5B9P1,

Release(12202621)

1460933

Due to defects in the wireless log data aging logic, data in the channel utilization trend graph of the past 24 hours is abnormally deleted on eWeb.

AC_RGOS 11.9(6)W5

1482866

[QC 167388] When a batch upgrade is performed for more than 3,000 APs through eWeb, delays in keepalive responses may cause APs to go offline.

AC_RGOS 11.9(6)W7,

Release(12212421)

1485342

[QC 167566] During application identification packet parsing, occasional time sequence exceptions may occur, leading to RG-WS7880 breakdown due to insufficient memory.

AC_RGOS 11.9(6)W5,

Release(12152821)

1495628

[QC 167545] When a large number of AP groups are associated on the WLAN list page of AC's eWeb, the eWeb rendering performance is insufficient. As a result, the SSID configuration is not displayed, or the system is suspended or does not respond when an SSID is edited.

AC_RGOS 11.9(6)W5,

Release(12152901)

1502144

During AM's registration to the AC, residual license information may exist due to logic processing errors, resulting in license quantity exceptions.

AC_RGOS 11.9(6)W5,

Release(12152822)

1509108

[QC 167480] In scenarios where Portal detection is enabled, a defect in the Portal detection logic may prevent clients from disconnecting from the AP.

AC_RGOS 11.9(6)W5B9P1, Release(12221518)

1512451

[QC 168195] In scenarios involving interconnection of aggregate ports across VACs, after the wireless environment runs for a long time, the client's MAC address may be different on the active and standby ACs, causing network suspension and connection failures.

AC_RGOS 11.9(6)W5, Release(12152822)

1518842

[QC 168354] When the domain name allowlist is configured, incompatibility between the AC of the new version and managed APs of the old version results in client authentication failures.

AC_RGOS 11.9(6)W5B9P1,

Release(12221518)

1526132

[QC 168453] Application identification exceptions cause device breakdown.

AC_RGOS 11.9(6)W5B9P1,

Release(12221518)

1528099

[QC 168450] In VAC scenarios, when the AC is restarted upon power failure, web-based authentication of clients fails due to occasional time sequence exceptions.

AC_RGOS 11.9(6)W5B9P1,

Release(12221518)

1539391

When the service log-format rfc5424 command is run on the AC, roaming logs are blocked abnormally, causing roaming log loss.

AC_RGOS 11.9(6)W5B9P2

1570523

In VAC scenarios, occasional LLDP memory leakage causes continuous increase of device memory usage.

AC_RGOS 11.9(6)W5, Release(11212918)

1631148

[QC 170609] In high-capacity VAC scenarios, occasional time sequence issues during client login/logout may trigger process restart.

AC_RGOS 11.9(6)W5, Release(12152901)

1619171

[QC 168093] When the AC manages the RG-AP9520-RDX without external antennas, eWeb incorrectly displays the alarm that the external antenna is installed in the alarm list.

AC_RGOS 11.9(6)W5,

Release(12152901)