Picture

RG-S6520-64CQ 100GE Data Center Access Switch

Recommended for large-scale Spine-Leaf three-tier DCI scenarios, M-LAG/VSU/de-stacking for higher availability

Models

RG-S6520-64CQ

64 x 100GE ports

Datasheet Sales Enquiry

Highlight Features

64 x 100GE QSFP28 ports housed in a 2 RU enclosure
Cross-device link aggregation (De-stacking/M-LAG/VSU), device-level redundancy, flexible networking, and high reliability
Lossless Ethernet, ensuring zero packet loss during RDMA E2E communication
Telemetry/gRPC/sFlow/SPAN-based network monitoring and automated O&M, making management simple and efficient

Features
Specifications
Resources
Order Information
FAQ

Sales Enquiry

Features

Data Center 100GE Access Switch RG-S6520-64CQ

100GE high-density access switch with 10GE/25GE/100GE downlink ports and 64 x 100GE uplink ports housed in a 2 RU enclosure for adaptation to different
scenarios, Large buffer and advanced buffer scheduling mechanism, providing fast data processing and easily coping with burst traffic

Cross-device Link Aggregation, Implementing Device-level Redundancy, Flexible Networking, and High Reliability

De-stacking

M-LAG

VSU

De-stacking technology logically aggregates multiple switches through LACP to allow servers on the same network segment or on different network segments to communicate. This eliminates the need to synchronize data between switches, without affecting service transmission.

PFC- and ECN-based Lossless Ethernet with High Throughput and Low Latency in RDMA Scenarios

With RDMA technology, data does not need to be handled by the CPU during device communication. This reduces the CPU burden
and effectively solves the network latency problem.
PFC+ECN, intelligent data exchange, and packet loss prevention, ensuring lossless data transmission

Telemetry-based Network Monitoring and Automated O&M,
Making Management Simple and Efficient

The switch enabled with telemetry provides clear data status and hierarchy.
The switch uses the push mode to proactively collect and push information and to provide sub-second-level network monitoring in real time, making network management more efficient and accurate.

Specifications

Hardware Specifications

System Specifications	RG-S6520-64CQ
Ports	64 x 100GE ports (QSFP28)
Expansion Module Slots	Two power supply module slots, supporting 1+1 redundancy Three fan module slots, supporting 2+1 redundancy
Management Port	One management port, one console port, and one USB port, compliant with the USB2.0 standard
Switching Capacity	12.8 Tbps
Packet Forwarding Rate	4482 Mpps
802.1Q VLAN	4094
Dimensions and Weight
Dimensions (W × D × H)	442 mm x 450 mm x 88.1 mm (17.40 in. x 17.72 in. x 3.47 in., 1 RU)
Weight	About 20 kg (44.09 lbs., including two power supply modules and three fan modules)
Power Supply and Consumption
AC	RG-PA800I-F module ● Rated voltage: 110 V AC/220 V AC ● Rated voltage range: 100 V AC to 240 V AC (50 Hz to 60 Hz) ● Max voltage range: 90 V AC to 264 V AC (47 Hz to 63 Hz) ● Rated input current range: 5 A to 10 A
High-voltage DC	RG-PA800I-F module ● Max voltage range: 180 V DC to 310 V DC ● Rated voltage: 240 V DC ● Rated input current: 5 A
Maximum Power Consumption	● Max: 600 W ● Typical: 410 W ● Static: 222 W
Environment and Reliability
Operating Temperature	0 °C to 45 °C (32 °F to 113°F)
Storage temperature	-40 °C to 70 °C (-40 °F to 158 °F)
Operating Humidity	10% RH to 90% RH
Storage humidity	5% to 95% RH (non-condensing)
Working altitude	Operating altitude: up to 5000 m (16,404.20 ft.) Storage altitude: up to 5000 m (16,404.20 ft.)

Software Specifications

Software Specifications	RG-S6520-64CQ
L2 Protocols	IEEE802.3ad (Link Aggregation Control Protocol), IEEE802.1p, IEEE802.1Q, IEEE802.1D (STP), IEEE802.1w (RSTP), IEEE802.1s (MSTP), IGMP Snooping, MLD Snooping, Jumbo Frame (9 KB), IEEE802.1ad (QinQ and selective QinQ), GVRP
L3 Protocols (IPv4)	BGP4, OSPFv2, RIPv1, RIPv2, MBGP, LPM Routing, Policy-based Routing (PBR), Route-policy, Equal-Cost Multi-Path Routing (ECMP), WCMP, VRRP, IGMP v1/v2/v3, PIM-SSM/SM/DM, MSDP, Any-RP
IPv6 Basic Protocols	Neighbor Discovery, ICMPv6, Path MTU Discovery, DNSv6, DHCPv6, ICMPv6, ICMPv6 redirection, ACLv6, TCP/UDP for IPv6, SNMP v6, Ping/Traceroute v6, IPv6 RADIUS, Telnet/SSH v6, FTP/TFTP v6, NTP v6, IPv6 MIB support for SNMP, VRRP for IPv6, IPv6 QoS
IPv6 Features	Static routing, ECMP, PBR, OSPFv3, RIPng, BGP4+, MLDv1/v2, PIM-SMv6, manual tunnel, automatic tunnel, IPv4 over IPv6 tunnel, and ISATAP tunnel
Multicast	IGMPv1, v2, v3、IGMP Host Behavior、Member Query and Response、Querier Election、IGMP Proxy、Multicast Static Routing、MSDP、PIM-DMv4(PIM-DM)、PIM-SMv4(PIM-SM/PIM-SSM/Enabling PIM on Layer-3 Subinterface)、PIM-SMv6、MLD v1 and v2、MLD Proxy、Enabling PIMv6 on Layer-3 Subinterface
ACL	Standard IP-based ACL、Extended MAC/IP-based ACL、Expert-level ACL、ACL 80、IPv6 ACL、When the same ACL is applied to different physical interfaces or SVIs, resources can be multiplexed.、ACL Logging、ACL Counter (Ingress and egress counters are supported in interface or global configuration modes)、ACL Re-marking、Global ACL、ACL-based Redirection、Displaying ACL Resources、Processing First Packet of TCP Handshake When Binding the ACL to Restrict SIP、Matching Against 5-Tuple of Pass-by VXLAN Inner IP Packets、The expert-level ACL supports matching the IP flag and DSCP fields of VXLAN inner packets、Ingress/Egress ACLs
Data Center Features	PFC, ECN, and other data center features M-LAG RDMA
Visualization	gRPC sFLOW sampling
QoS	Mapping of IEEE 802.1p, DSCP, and ToS priorities ACL-based traffic classification Priority marking/remarking Multiple queue scheduling mechanisms, including SP, WRR, DRR, SP+WRR, and SP+DRR
Virtualization	Virtual Switching Unit
Buffer Management	Buffer status monitoring and management, and identification of burst traffic
HA Design	GR for RIP/OSPF/BGP, BFD, REUP dual-link fast switching and RLDP unidirectional link detection, 1+1 power redundancy and fan redundancy, and hot swapping for all cards and power supply modules
Security Features	Network Foundation Protection Policy (NFPP), CPP, DDoS attack defense, illegitimate data packet detection, data encryption, source IP spoofing prevention, IP scanning prevention, RADIUS/TACACS, IPv4/v6 packet filtering by basic ACL, extended ACL or VLAN-based ACL, plaintext-based and MD5 ciphertext-based authentication for OSPF, RIPv2, and BGPv4 packets, telnet login and password mechanisms for restricted IP addresses, uRPF, broadcast packet suppression, DHCP Snooping, ARP spoofing prevention, and ARP check
Management Mode	SNMP v1/v2c/v3, Netconf, telnet, console, MGMT, RMON, SSHv1/v2, FTP/TFTP, NTP clock, syslog, SPAN/RSPAN/ERSPAN, and configuration rollback
Other Protocols	DHCP Client, DHCP Relay, DHCP Server, DNS Client, UDP relay, ARP Proxy, and Syslog

Safety and Regulatory Compliance

Specifications	RG-S6520-64CQ
Safety	● IEC 62368-1 ● EN 62368-1 ● NM EN 62368-1 ● NM CEI 62368-1 ● BS EN 62368-1 ● GB 4943.1
Electromagnetic Compatibility (EMC)	● EN 55032 ● EN 55035 ● NM EN 55035 ● BS EN55032 ● BS EN 55035 ● BS EN 61000-3-2 ● BS EN61000-3-3 ● EN IEC 61000-3-3 ● EN IEC 61000-3-2 ● NM EN 61000-3-2 ● NM EN 61000-3-3 ● EN 300 386 ● VCCI-CLSPR 32 ● GB/T 9254.1
Environment	● 2011/65/EU EN 50581 ● 2012/19/EU EN 50419 ● (EC) No.1907/2006 ● GB/T 26572

*For more country-specific regulatory information and approvals, contact your local sales agency.

Resources All Resources

Learn about Products or Solutions

Product Datasheet

Installation

Installation Guide

Software and Configuration

Order Information

The configuration procedure for the RG-S6520 series switches is as follows:

Select the switch.
Select the fan and power supply modules.

Select optical transceivers based on port requirements.

Chassis, Fan, and Power Supply Modules

Product Model	Description
RG-S6520-64CQ	64 × 100GE ports Two power supply module slots and three fan module slots The power supply model is RG-PA800I-F, and the fan model is M6520-FAN-F.
RG-PA800I-F	Power supply module, supporting 1+1 redundancy, hot swapping, and front-to-rear ventilation design
M6520-FAN-F	Fan module, supporting 2+1 redundancy, hot swapping, and front-to-rear ventilation design

100GBASE Series Optical Modules

Product Model	Description
100G-QSFP-SR-MM850	100G SR module, QSFP28 form factor, MPO, 850 nm, 100 m (328.08 ft.) over MMF
100G-QSFP-LR4-SM1310	100G LR4 module, QSFP28 form factor, Duplex LC, 1310 nm, 10 km (32,808.40 ft.) over SMF
100G-QSFP-iLR4-SM1310	100G iLR4 module, QSFP28 form factor, Duplex LC, 1310 nm, 2 km (6,561.68 ft.) over SMF
100G-QSFP-ER4-SM1310	100G ER4 module, QSFP28 form factor, Duplex LC, 1310 nm, 40 km (131,233.59 ft.) over SMF
100G-AOC-10M	100G QSFP28 AOC cable, 10 m (32.81 ft.)
100G-AOC-5M	100G QSFP28 AOC cable, 5 m (16.40 ft.)

40GBASE Series Optical Modules

Product Model	Description
40G-QSFP-SR-MM850	40G SR module, QSFP+ form factor, MPO, 150 m (492.13 ft.) over MMF
40G-QSFP-LR4-SM1310	40G LR4 module, QSFP+ form factor, Duplex LC, 10 km (32,808.40 ft.) over SMF
40G-QSFP-LSR-MM850	40G LSR module, QSFP+ form factor, MPO, 400 m (1,312.34 ft.) over MMF
40G-QSFP-LX4-SM1310	40G LX4 module, QSFP+ form factor, Duplex LC connector, 150 m (492.13 ft.) over OM3/OM4 MMF, or 2 km (6,561.68 ft.) over SMF
40G-QSFP-iLR4-SM1310	40G iLR4 module, QSFP+ form factor, Duplex LC, 2 km (6,561.68 ft.) over SMF
40G-AOC-30M	40G QSFP+ AOC cable, 30 m (98.43 ft.)
40G-AOC-5M	40G QSFP+ AOC cable, 5 m (16.40 ft.)

FAQ Ask a Question

Tips: Product information and performance will be affected by upgrade iteration, specific environment and other factors, so FAQ content is for reference only. For further information, please contact online support.

Higher Education

5-Star Hotel Solution

RG-S6520-64CQ 100GE Data Center Access Switch

Data Center 100GE Access Switch RG-S6520-64CQ

100GE high-density access switch with 10GE/25GE/100GE downlink ports and 64 x 100GE uplink ports housed in a 2 RU enclosure for adaptation to different
scenarios, Large buffer and advanced buffer scheduling mechanism, providing fast data processing and easily coping with burst traffic