Ruijie RG-CS8808 Series Switches CS88_RGOS 12.6(2)B0204
	Release Notes
			Document Version: V1.1 Date: 2023.05.16 Copyright © 2023 Ruijie Networks

 

Copyright

Copyright © 2023 Ruijie Networks

All rights are reserved in this document and this statement.

Any reproduction, excerption, backup, modification, transmission, translation or commercial use of this document or any portion of this document, in any form or by any means, without the prior written consent of Ruijie Networks is prohibited.

Trademark  and  are owned by Ruijie Networks.

All other trademarks or registered trademarks mentioned in this document are owned by their respective owners.

Disclaimer

The products, services, or features you purchase are subject to commercial contracts and terms. Some or all of the products, services or features described in this document may not be within the scope of your purchase or use. Unless otherwise agreed in the contract, Ruijie Networks does not make any express or implied statement or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to time. Ruijie Networks reserves the right to modify the content of the document without any notice or prompt.

This manual is for reference only. Ruijie Networks endeavors to ensure content accuracy and will not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Intended Audience

This document is intended for:

l  Network engineers

l  Technical support and servicing engineers

l  Network administrators

Technical Support

l  Ruijie Networks Website: https://www.ruijienetworks.com/

l  Technical Support Website: https://ruijienetworks.com/support

l  Case Portal: https://caseportal.ruijienetworks.com

l  Community: https://community.ruijienetworks.com

l  Technical Support Email: service_rj@ruijienetworks.com

l  Skype: service_rj@ruijienetworks.com

Conventions

1.     Conversions

Convention	Description
Bold font	Commands, command options, and keywords are in bold font.
Italic font	Arguments for which you supply values are in italic font.
[ ]	Elements in square brackets are optional.
{ x | y | z }	Alternative keywords are grouped in braces and separated by vertical bars.
[ x | y | z ]	Optional alternative keywords are grouped in brackets and separated by vertical bars.
&<1-n>	The argument before the sign (&) can be input for consecutive 1- n times.
//	Double slashes at the beginning of a line of code indicate a comment line.

 

1.     Signs

The signs used in this document are described as follows:

 

 

 

 

 

1 Version Information

Version Number	RGOS 12.6(2)B0204
Applicable Products	RG-CS88-08 CM88-CM CM88-48XS-H CM88-8CQ-H CM88-48GT-H CM88-48SFP-H
Category	Official release
Customers	Global customers
Release Date	2023-04-03
Baseline Version	N/A
Reason for Release	Official release. The RG-CS8808 series switches running this release can be managed by Ruijie Cloud.

 

Use the show version detail command to check the version number.

Ruijie#sho ver detail

System description      : Ruijie High-density IPv6 100G Core Routing Switch(CS88-08) By Ruijie Networks

System start time       : 2023-03-31 16:32:25

System uptime           : 0:03:44:19

System hardware version : 1.00

System software version : CS88_RGOS 12.6(2)B0204

System patch number     : NA

System software number  : M15162103292023

System serial number    : 1234942570005

System boot version     : 1.3.33(Master) 1.3.25(Slave)

System rboot version    : 1.1.46

System core version     : 3.10.108-rt80-Cavium-Octeon+

Module information:

  Slot M1 : CM88-CM

    System uptime       : 0:03:44:13

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.25(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : 1234942570005

  Slot 2 : CM88-48GT-H

    System uptime       : 0:03:44:18

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.30(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : G1NW40U000099

  Slot 3 : CM88-48SFP-H

    System uptime       : 0:03:44:18

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.25(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : G1P10NB000353

2 Release Record

Release Date	Upgrade File	Description
2023-03-24	CS88-RELEASE_RGOS12.6(2)B0204_10151617_install.bin	Pilot release for RG-CS8808 series switches
2023-04-03	CS88-RELEASE_RGOS12.6(2)B0204_install.bin	Official release for RG-CS8808 series switches

3 Resolved Issues

Number	NA
Description	NA

 

4 Remaining Issues

NA

 

5 Hardware Support

Hardware Type	Hardware Model	Version Number
Chassis	RG-CS88-08	1.0
Supervisor engine	CM88-CM	1.0
Line card	CM88-48XS-H	1.0
Line card	CM88-8CQ-H	1.0
Line card	CM88-48GT-H	1.0
Line card	CM88-48SFP-H	1.0

6 Version Change

Version	Baseline	Description
1.6(2)B0204	NA	Official release for RG-CS8808 series multi-GE switches

1.1   Hardware Support Change

Hardware Type	Hardware Model	Version Number
Chassis	RG-CS88-08	1.0
Supervisor engine	CM88-CM	1.0
Line card	CM88-48XS-H	1.0
Line card	CM88-8CQ-H	1.0
Line card	CM88-48GT-H	1.0
Line card	CM88-48SFP-H	1.0

 

1.2   Feature Support Change

The RG-CS8808 series switches running this release can be managed by Ruijie Cloud.

 

7 Upgrade Instructions

1.1   Upgrade Files

To upgrade the device to this version, the following upgrade files are required.

Upgrade File	CS88-RELEASE_RGOS12.6(2)B0204_install.bin
File Description	Installation Package
File Size	240989911 Bytes
Applicable Product	RG-CS88-08 CM88-CM CM88-48XS-H CM88-8CQ-H CM88-48GT-H CM88-48SFP-H
MD5	136dab6bc179dc05fe59f60180697beb
Software Version	RGOS12.6(2)B0204

 

1.2   Prerequisites

NA

1.3   Precautions

l  After the upgrade is complete, do not restart the device until the logs of all modules except the master supervisor engine module prompt that the synchronization is complete.

%UPGRADE-6-INFO: Upgrade finish  This prompt indicates that all modules have been upgraded successfully.

%UPGRADE-6-AUTO_SYNC: (*1/M1) Download package from master device, keep power on...  This prompt indicates that this line card is backing up the upgrade package. Do not restart the device.

%UPGRADE-6-AUTO_SYNC: (*1/M2) Download package from master device, keep power on...  This prompt indicates that this line card is backing up the upgrade package. Do not restart the device.

%UPGRADE-6-AUTO_SYNC: (*1/M2) Finish download package from master device.  This prompt indicates that the upgrade package has been backed up successfully. Do not restart the device until this prompt is displayed on each supervisor engine.

%UPGRADE-6-AUTO_SYNC: (*1/M1) Finish download package from master device.  This prompt indicates that the upgrade package has been backed up successfully. Do not restart the device until this prompt is displayed on each supervisor engine.

l  During the upgrade and downgrade, pay attention to the prompts. If failures occur, please save the log and contact us for technical assistance.

l  During the upgrade and downgrade, you are advised not to power off the device, reset the system, or plug in/unplug any module if the related prompts are displayed.

l  After the upgrade and downgrade, run the show version command to view the current version of the device and check the firmware.

1.4   Procedure

1.4.1  Upgrade under the Main Program

(1)   Run the CLI command on the PC configured with IP address x.x.x.x (The following bin file name is just an example.):

Ruijie# upgrade download oob_tftp://x.x.x.x/ CS88-RELEASE_RGOS12.6(2)B0204_install.bin

*May 14 10:32:20: %UPGRADE-6-INFO: Copy to /data/upgrade_rep/

*May 14 10:32:20: %UPGRADE-6-INFO: Please wait for a moment......

Press Ctrl+C to quit

!!!!!!!!!!!!!!!!!!!!!!!!!!!...

< The terminal is locked by upgrade module >

Upgrade start

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!10%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!20%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!30%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!40%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!50%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!60%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!100%

Upgrade success <- When you see the prompt “Upgrade finish”, the copy operation is complete (The BIN file takes effect only after the device is restarted).

< The terminal is unlocked by upgrade module >

[Slot 0]

        Device type     : cs88

        Status          : success

(2)   Restart the device after the upgrade is complete to validate the BIN file.

Ruijie#reload

Reload system?(Y/N)y

Ruijie#*May 14 12:51:02: %DP-3-RESET_DEV: Reset device 1 due to SYSMON/4215/CONSOLE/reset system by reload command.

*May 14 12:51:02: %DP-3-MACHINE_RESTART: MACHINE_RESTART.

[504172.116141] %SYS-0-REBOOT: Rebooting by job: dp_mom_thread/4265

[504172.126545] reboot: Restartin

U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)

Clock Configuration:

       CPU0(A53):1200 MHz  CPU1(A53):1200 MHz

       Bus:      500  MHz  DDR:      1600 Mbps

DRAM:  1 GiB (DDR4, 16-bit, CS=2, ECC on)

Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

32 MiBMMC:   Only Support 3.3 voltage

sdhci@30400000: 0

Loading Environment from SPI Flash... OK

Boot:   Master

Net:   eth0: ethernet@33410000

Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

14 bytes read in 2 ms (6.8 KiB/s)

33 bytes read in 2 ms (15.6 KiB/s)

6814976 bytes read in 150 ms (43.3 MiB/s)

8422045 bytes read in 184 ms (43.7 MiB/s)

36561 bytes read in 3 ms (11.6 MiB/s)

starting pid 1179, tty '': '-/etc/sysinit'

starting initrd

Switching rootfs

[    1.258085] TIPC: Activated (version 2.0.0)

[    1.258546] TIPC: Started in single node mode

log: connected to ubus

 

Press RETURN to get started

(3)   Run the “show version detail” command to confirm the upgrade success.

Ruijie#show version detail

System description      : Ruijie High-density IPv6 100G Core Routing Switch(CS88-08) By Ruijie Networks

System start time       : 2023-03-31 16:32:25

System uptime           : 0:03:44:19

System hardware version : 1.00

System software version : CS88_RGOS 12.6(2)B0204

System patch number     : NA

System software number  : M15162103292023

System serial number    : 1234942570005

System boot version     : 1.3.33(Master) 1.3.25(Slave)

System rboot version    : 1.1.46

System core version     : 3.10.108-rt80-Cavium-Octeon+

Module information:

  Slot M1 : CM88-CM

    System uptime       : 0:03:44:13

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.25(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204    Software number     : M15162103292023

    Serial number       : 1234942570005

  Slot 2 : CM88-48GT-H

    System uptime       : 0:03:44:18

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.30(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : G1NW40U000099

  Slot 3 : CM88-48SFP-H

    System uptime       : 0:03:44:18

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.25(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : G1P10NB000353

1.4.2  Upgrade with a USB Flash Disk

(1)   Run the “upgrade usb0:/xxx.bin” command.

Ruijie# upgrade usb0:/ CS88-RELEASE_RGOS12.6(2)B0204_install.bin

< The terminal is locked by upgrade module >

Upgrade start

!!!Running this command may take some time, please wait.

!!!!!!!!!!!!!!!!!!!!!!!!!!!10%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!20%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!30%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!40%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!50%

< you can press Ctrl+C to unlock terminal >

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!60%

< you can press Ctrl+C to unlock terminal >

100%

Upgrade success  <- When the message “Upgrade finish” is displayed, the copy operation is complete (the BIN file takes effect only after the device is restarted).

< The terminal is unlocked by upgrade module >

[Slot 0]

        Device type     : cs88

        Status          : success 

During the upgrade, you can run the “show upgrade status” command to check the upgrade status:

Ruijie#show upgrade status

upgrade global status: UPGRADING

[Slot 0]

        Device type     : cs88

        Status          : upgrading <- When the upgrade is complete, the message “success” is displayed.

(2)   Restart the device to validate the BIN file.

Ruijie#reload

Reload system?(Y/N)y

Ruijie#*May 14 12:51:02: %DP-3-RESET_DEV: Reset device 1 due to SYSMON/4215/CONSOLE/reset system by reload command.

*May 14 12:51:02: %DP-3-MACHINE_RESTART: MACHINE_RESTART.

[504172.116141] %SYS-0-REBOOT: Rebooting by job: dp_mom_thread/4265

[504172.126545] reboot: Restartin

U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)

Clock Configuration:

       CPU0(A53):1200 MHz  CPU1(A53):1200 MHz

       Bus:      500  MHz  DDR:      1600 Mbps

DRAM:  1 GiB (DDR4, 16-bit, CS=2, ECC on)

Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

32 MiBMMC:   Only Support 3.3 voltage

sdhci@30400000: 0

Loading Environment from SPI Flash... OK

Boot:   Master

Net:   eth0: ethernet@33410000

Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

14 bytes read in 2 ms (6.8 KiB/s)

33 bytes read in 2 ms (15.6 KiB/s)

6814976 bytes read in 150 ms (43.3 MiB/s)

8422045 bytes read in 184 ms (43.7 MiB/s)

36561 bytes read in 3 ms (11.6 MiB/s)

starting pid 1179, tty '': '-/etc/sysinit'

starting initrd

Switching rootfs

[    1.258085] TIPC: Activated (version 2.0.0)

[    1.258546] TIPC: Started in single node mode

log: connected to ubus

 

Press RETURN to get started

(3)   Run the “show version detail” command to confirm the upgrade success.

Ruijie#show version detail

System description      : Ruijie High-density IPv6 100G Core Routing Switch(CS88-08) By Ruijie Networks

System start time       : 2023-03-31 16:32:25

System uptime           : 0:03:44:19

System hardware version : 1.00

System software version : CS88_RGOS 12.6(2)B0204

System patch number     : NA

System software number  : M15162103292023

System serial number    : 1234942570005

System boot version     : 1.3.33(Master) 1.3.25(Slave)

System rboot version    : 1.1.46

System core version     : 3.10.108-rt80-Cavium-Octeon+

Module information:

  Slot M1 : CM88-CM

    System uptime       : 0:03:44:13

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.25(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : 1234942570005

  Slot 2 : CM88-48GT-H

    System uptime       : 0:03:44:18

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.30(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : G1NW40U000099

  Slot 3 : CM88-48SFP-H

    System uptime       : 0:03:44:18

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.25(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : G1P10NB000353

1.4.3  Upgrade under Uboot

(1)   Run the “@@@@b” command

Ruijie#@@@@b

[156375.133279] IRQ RESPONSES

U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)

Clock Configuration:

       CPU0(A53):1200 MHz  CPU1(A53):1200 MHz

       Bus:      500  MHz  DDR:      1600 Mbps

DRAM:  1 GiB (DDR4, 16-bit, CS=2, ECC on)

Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

32 MiBMMC:   Only Support 3.3 voltage

sdhci@30400000: 0

Loading Environment from SPI Flash... OK

Boot:   Master

Net:   eth0: ethernet@33410000

Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

During the reboot, press Ctrl+C immediately when the following message is displayed to ask you to access the Rboot interface.

Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

Rboot                            Version: 1.1.15

------------------------------------------------

    Mount rootfs1 ...

    Mount rootfs2 ...

    Mount data ...

    Mount upgrade ...

    Mount upgrade_bak ...

====== Rboot Menu (Ctrl+Z to upper level) ======

    TOP menu items.

************************************************

    1. Tftp utilities.

    1. X/Y/ZModem utilities.

    1. Run main.

    1. SetMac utilities.

    1. Scattered utilities.

************************************************

Press a key to run the command: 

Click the prompt in red under the Rboot menu to access the address configuration menu:

====== Rboot Menu(Ctrl+Z to upper level) ======

    TOP menu items.

************************************************

    1. Tftp utilities.

    1. XModem utilities.

    1. Run main.

    1. SetMac utilities.

    1. Scattered utilities.

************************************************

Press a key to run the command:

====== Rboot Menu(Ctrl+Z to upper level) ======

   Tftp utilities.

************************************************

   1. Upgrade uboot program.

   1. Upgrade rboot program.

   1. Upgrade main program.

   1. Burn the total FlashROM by this downloaded file.

************************************************

Press a key to run the command: 

enter the Local IP:[]:

Under the address configuration menu, enter the switch IP address, PC IP address, and BIN file name:

Press a key to run the command: 

enter the Local IP:[]:192.12.1.1   <- This address is the switch IP address, configured in the same network segment as the execution PC.

enter the Remote IP:[]:192.12.1.2 <- This address is the PC IP address.

enter the Filename:[]:CS88-RELEASE_RGOS12.6(2)B0204_install.bin <- This file name serves as an example.

The upgrade operation starts after the preceding addresses and file name are entered:

% Total    % Received % Xferd  Average Speed   Time    Time     Time  Current

Dload  Upload   Total   Spent    Left  Speed

147M  100  147M    0     0  1902k      0  0:01:19  0:01:19 --:--:-- 1968k

100  147M  100  147M    0     0  1902k      0  0:01:19  0:01:19 --:--:-- 1902k

Upgrading, keep power on and wait please ...

Select Y as prompted to proceed until the system displays the message “Upgrade Success” (the upgrade file is copied successfully):

Determined to upgrade? [Y/N]: Y

Mount File System ...

Copy file to Flash ...

Upgrade Rootfs Success.

Upgrade Success

After the upgrade file is copied successfully, it automatically returns to the Rboot menu interface. Press Ctrl+Z to exit the menu for reboot. (You can also directly power off and restart the device.):

====== Rboot Menu(Ctrl+Z to upper level) ======

Tftp utilities.

************************************************

1. Upgrade uboot program.

1. Upgrade rboot program.

1. Upgrade main program.

1. Burn the total FlashROM by this downloaded file.

************************************************

Press a key to run the command:

====== Rboot Menu(Ctrl+Z to upper level) ======

TOP menu items.

************************************************

1. Tftp utilities.

1. XModem utilities.

1. Run main.   <- Select Run main, and the switch will automatically restart.

1. SetMac utilities.

1. Scattered utilities.

************************************************

Wait for the device to restart:

*May 14 12:51:02: %DP-3-MACHINE_RESTART: MACHINE_RESTART.

[504172.116141] %SYS-0-REBOOT: Rebooting by job: dp_mom_thread/4265

[504172.126545] reboot: Restartin

U-Boot 1.4.14-gc4283be (Mar 21 2020 - 21:56:04 +0800)

Clock Configuration:

       CPU0(A53):1200 MHz  CPU1(A53):1200 MHz

       Bus:      500  MHz  DDR:      1600 Mbps

DRAM:  1 GiB (DDR4, 16-bit, CS=2, ECC on)

Flash: SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

SF: Detected mx25l25635f with page size 256 Bytes, erase size 64 KiB, total 32 MiB

32 MiBMMC:   Only Support 3.3 voltage

sdhci@30400000: 0

Loading Environment from SPI Flash... OK

Boot:   Master

Net:   eth0: ethernet@33410000

Press Ctrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

14 bytes read in 2 ms (6.8 KiB/s)

33 bytes read in 2 ms (15.6 KiB/s)

6814976 bytes read in 150 ms (43.3 MiB/s)

8422045 bytes read in 184 ms (43.7 MiB/s)

36561 bytes read in 3 ms (11.6 MiB/s)

starting pid 1179, tty '': '-/etc/sysinit'

starting initrd

Switching rootfs

[    1.258085] TIPC: Activated (version 2.0.0)

[    1.258546] TIPC: Started in single node mode

log: connected to ubus

 

Press RETURN to get started

(2)   Run the “show version detail” command to check whether the upgrade is successful.

Ruijie#show version detail

System description      : Ruijie High-density IPv6 100G Core Routing Switch(CS88-08) By Ruijie Networks

System start time       : 2023-03-31 16:32:25

System uptime           : 0:03:44:19

System hardware version : 1.00

System software version : CS88_RGOS 12.6(2)B0204

System patch number     : NA

System software number  : M15162103292023

System serial number    : 1234942570005

System boot version     : 1.3.33(Master) 1.3.25(Slave)

System rboot version    : 1.1.46

System core version     : 3.10.108-rt80-Cavium-Octeon+

Module information:

  Slot M1 : CM88-CM

    System uptime       : 0:03:44:13

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.25(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : 1234942570005

  Slot 2 : CM88-48GT-H

    System uptime       : 0:03:44:18

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.30(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : G1NW40U000099

  Slot 3 : CM88-48SFP-H

    System uptime       : 0:03:44:18

    Hardware version    : 1.00

    Boot version        : 1.3.33(Master) 1.3.25(Slave)

    Rboot version       : 1.1.46

    Software version    : CS88_RGOS 12.6(2)B0204

    Software number     : M15162103292023

    Serial number       : G1P10NB000353

8 Related Documentation

 

File name	Description
Ruijie  RG-CS88 Series Switches Release Notes, RGOS 12.6(2)B0204	This manual introduces CS88_RGOS 12.6(2)B0204 version, including: version information, resolved issues, remaining issues, hardware support, version change record, upgrade instructions, and Related Documentation.
Ruijie  RG-CS88 Series Switches Configuration Guide, RGOS 12.6(2)B0204	This manual describes various network protocols and their implementation principles supported by CS88_RGOS 12.6(2)B0204 with detailed configuration examples.
Ruijie  RG-CS88 Series Switches Command Reference, RGOS 12.6(2)B0204	This manual describes all configuration commands supported by CS88_RGOS 12.6(2)B0204 version, including the command modes, parameter descriptions and usage guidelines with specific examples.
Ruijie  RG-CS88 Series Switches Web-based Configuration Guide, RGOS 12.6(2)B0204	This manual describes how to configure the functions supported by CS88_RGOS 12.6(2)B0204 through the Web management system with detailed configuration examples.
Ruijie  RG-CS88 Series Switches Hardware Installation and Reference Guide	This manual describes the functional and physical features of the RG-CS88 Series switches and provides equipment installation procedures, hardware troubleshooting, technical specifications of module, as well as the specifications and usage guidelines of cables and connectors.