Item

RG-S6580-48CQ8QC

RG-S6580-24DC8QC

Dimensions (W x D x H)

442 mm x 670 mm x 43.6 mm (17.40 in. x 26.38 in. x 1.72 in.)

442 mm x 670 mm x 43.6 mm (17.40 in. x 26.38 in. x 1.72 in.)

Rack height

1 RU

1 RU

Unit weight

11.5 kg (25.35 lbs., a chassis with two power modules and six fan modules)

11 kg (24.25 lbs., a chassis with two power modules and six fan modules)

Switching capacity

16.0 Tbps

16.0 Tbps

Packet forwarding rate

5350 Mpps

5350 Mpps

Service port

48 x 100G DSFP ports

8 x 100G/400G QSFP-DD ports

24 x 40G/100G/200G QSFP56 ports

8 x 100G/400G QSFP-DD ports

Management port

1 x RJ45 console port

1 x RJ45 MGMT port

1 x RJ45 console port

1 x RJ45 MGMT port

USB port

1 x USB 2.0 port (Type A connector)

1 x USB 2.0 port (Type A connector)

Module slot

2 x power module slots

6 x fan module slots

2 x power module slots

6 x fan module slots

Power consumption

Maximum power consumption: 742 W

Typical power consumption: 633 W

Static power consumption: 178 W

Maximum power consumption: 850 W

Typical power consumption: 700 W

Static power consumption: 300 W

Power input

RG-PA1200I-F (AC input)

Rated input voltage:

100 V AC to 127 V AC, 200 V AC to 240 V AC, 50 Hz/60Hz

Maximum input voltage:

90 V AC to 140 V AC, 180 V AC to 264 V AC, 47 Hz to 63 Hz

Rated input current:

13.8 A(100 V AC to 127 V AC)

8.5 A (200 V AC to 240 V AC)

Power port type: C14

RG-PA1200I-F (HVDC input):

Rated input voltage: 240 V DC

Maximum input voltage: 180 V DC to 300 V DC

Rated current: 6.5 A

Power port type: C14

RG-PA1200I-F (AC input)

Rated input voltage:

100 V AC to 127 V AC, 200 V AC to 240 V AC, 50 Hz/60Hz

Maximum input voltage:

90 V AC to 140 V AC, 180 V AC to 264 V AC, 47 Hz to 63 Hz

Rated input current:

13.8 A(100 V AC to 127 V AC)

8.5 A (200 V AC to 240 V AC)

Power port type: C14

RG-PA1200I-F (HVDC input):

Rated input voltage: 240 V DC

Maximum input voltage: 180 V DC to 300 V DC

Rated current: 6.5 A

Power port type: C14

Temperature

Operating temperature: 0°C to 40°C (32°F to 104°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Note: At altitudes ranging from 1800 m (5,905.51 ft.) to 5000 m (16,404.20 ft.), the maximum temperature decreases by 1°C (1.8°F) for every 200 m (656.17 ft.) increase in elevation.

Operating temperature: 0°C to 40°C (32°F to 104°F)

Storage temperature: –40°C to +70°C (–40°F to +158°F)

Note: At altitudes ranging from 1800 m (5,905.51 ft.) to 5000 m (16,404.20 ft.), the maximum temperature decreases by 1°C (1.8°F) for every 200 m (656.17 ft.) increase in elevation.

Humidity

Operating humidity: 10% RH to 90% RH (non-condensing)

Storage humidity: 5% RH to 95% RH (non-condensing)

Operating humidity: 10% RH to 90% RH (non-condensing)

Storage humidity: 5% RH to 95% RH (non-condensing)

Altitude

Operating altitude: ≤ 5,000 m (16,404.20 ft.)

Storage altitude: ≤ 5000 m (16,404.20 ft.)

Operating altitude: ≤ 5,000 m (16,404.20 ft.)

Storage altitude: ≤ 5000 m (16,404.20 ft.)

Cooling

Air cooling, front-to-rear airflow (port-side intake)

Air cooling, front-to-rear airflow (port-side intake)

Item

RG-S6580-48CQ8QC

RG-S6580-24DC8QC

Layer 2 Protocols

IEEE 802.3x, IEEE 802.3ad (Link Aggregation Control Protocol), IEEE 802.1p, IEEE 802.1Q, IEEE 802.1D (STP), IEEE 802.1w (RSTP), IEEE 802.1s (MSTP), Jumbo Frame (9 KB)

Layer 3 Protocols (IPv4)

BGP4, OSPFv2, RIPv1, RIPv2, LPM routing, Policy-based Routing (PBR), route-policy, Equal-Cost Multi-Path Routing (ECMP), WCMP, VRRP

IPv6 Basic Protocols

Neighbor Discovery, ICMPv6, Path MTU Discovery, DNSv6, DHCPv6, ICMPv6, ICMPv6 redirection, ACLv6, TCP/UDP for IPv6, SNMP v6, Ping/Traceroute v6, IPv6 RADIUS, Telnet/SSH v6, FTP/TFTP v6, NTP v6, IPv6 MIB support for SNMP, VRRP for IPv6, IPv6 QoS

IPv6 Features

Static routing, ECMP, PBR, OSPFv3, RIPng, BGP4+

Data Center Features

PFC, ECN, and other data center features

RDMA

VXLAN bridge

VXLAN gateway

IPv6 VXLAN over IPv4

IPv4 VXLAN over IPv4

ECN over VXLAN

PFC over VXLAN

Visualization

gRPC

sFlow sampling

IPFIX

QoS

Mapping of IEEE 802.1p, DSCP, and ToS priorities
ACL-based traffic classification
Priority marking/remarking
Multiple queue scheduling mechanisms, including SP, WRR, WFQ, DRR, SP+WRR, SP+WFQ, and SP+DRR
Congestion avoidance mechanisms such as WRED and tail discarding

HA Design

GR for RIP/OSPF/BGP, BFD, DLDP, REUP dual-link fast switching, RLDP unidirectional link detection, 1+1 power redundancy and fan redundancy, and hot swapping for all cards and power supply modules

Security Features

Network foundation protection policy (NFPP), CPP, RADIUS/TACACS, IPv4/v6 packet filtering by basic ACL, extended ACL or VLAN-based ACL, plaintext-based and MD5 ciphertext-based authentication for OSPF, and BGPv4 packets, telnet login and password mechanisms for restricted IP addresses, broadcast packet suppression, hierarchical user management

Management Mode

SNMP v1/v2c/v3, telnet, console, MGMT, RMON, SSHv1/v2, FTP/TFTP, NTP, syslog, SPAN/RSPAN/ERSPAN, ZTP, NETCONF, Python, fan and power alarm, and temperature alarm

Other Protocols

DHCP client, DHCP relay, DHCP server, DNS client, ARP proxy, and Syslog