RG-S6160-28VS8CQ-X Series Next-Generation 28-Port 10GE All-Optical Layer 3 Core/Aggregation Switch with 100 Gbps Uplinks

Port Specifications

RG-S6160-28VS8CQ-X

RG-S6160-48VS8CQ-X

RG-S6160-48XMG4VS2CQ-UP-X

Fixed service port

24 x 1G/2.5G/10G/25G (25G supported by the license) SFP28 ports

4 x 25G SFP28 ports

8 x 40G/100G QSFP28 ports (Each 40G port can be split into four 10G ports or each 100G port can be split into four 25G ports.)

48 x 1G/2.5G/10G/25G (25G supported by the license) SFP28 ports

8 x 40G/100G QSFP28 ports (Each 40G port can be split into four 10G ports or each 100G port can be split into four 25G ports.)

48 x 100M/1G/2.5G/5GE/10G RJ45 ports with auto-negotiation

4 x 10G/25G SFP28 ports

2 x 40G/100G QSFP28 ports

Module slot

4 x fan module slots

2 x power module slots

4 x fan module slots

2 x power module slots

3 x fan module slots

2 x power module slots

Power module

RG-PA550I II-F

RG-PA550I II-F

RG-PA600I-P-F

RG-PA1000I-P-F

Fixed management port

1 x MGMT port

1 x console port

USB port

1 x USB 2.0 port

System Specifications

Switching capacity

3 Tbps

4 Tbps

1.56 Tbps

Packet forwarding rate

915 Mpps

915 Mpps

915 Mpps

Power Supply and Consumption

Power input

RG-PA550I II-F (AC input):

● Rated input voltage: 100 V AC to 240 V AC

● Maximum input voltage: 90 V AC to 264 V AC

● Frequency: 50 Hz/60 Hz

G-PA550I II-F (HVDC input):

● Rated input voltage: 240 V DC

● Maximum input voltage: 192 V DC to 288 V DC

RG-PA550I II-F (AC input):

● Rated input voltage: 100 V AC to 240 V AC

● Maximum input voltage: 90 V AC to 264 V AC

● Frequency: 50 Hz/60 Hz

G-PA550I II-F (HVDC input):

● Rated input voltage: 240 V DC

● Maximum input voltage: 192 V DC to 288 V DC

RG-PA600I-P-F (AC input):

● Rated input voltage: 100 V AC to 240 V AC

● Maximum input voltage: 90 V AC to 264 V AC

● Frequency: 50 Hz/60 Hz

● Rated current per circuit: 8 A

RG-PA1000I-P-F (AC input):

● Rated input voltage: 100 V AC to 240 V AC

● Maximum input voltage: 90 V AC to 264 V AC

● Frequency: 50 Hz/60 Hz

● Rated current per circuit: 8 A

PoE

Not supported

Not supported

Ports 1 to 48 support PoE/PoE+ power supply. Ports 1 to 24 support PoE++ power supply. Maximum output power of a port: 90 W

Maximum Power Consumption

270 W

300 W

Without PoE load: 280 W

Full PoE load: 1,480 W

Dimensions and Weight

Unit dimensions (W x D x H)

442 mm x 387 mm x 44 mm (17.40 in. x 15.24 in. x 1.73 in.)

442 mm x 387 mm x 44 mm (17.40 in. x 15.24 in. x 1.73 in.)

442 mm x 420 mm x 44 mm (17.40 in. x 16.54 in. x 1.73 in.)

Environment and Reliability

Fan module

Fan module redundancy, hot swapping, fan speed adjustment, and fan fault alarms

Temperature alarm

Supported

Temperature

Operating temperature: 0°C to 45°C (32°F to 113°F)

Storage temperature: --40°C to +70°C (--40°F to +158°F)

Humidity

Operating humidity: 10% to 90% RH (non-condensing)

Storage humidity: 5% to 95% RH (non-condensing)

Feature

RG-S6160-X Series

VLAN

4K 802.1Q VLANs

Port-based VLAN

Private VLAN

Voice VLAN

GVRP

QinQ

Basic QinQ

Selective QinQ

Link aggregation

LACP (802.3ad)

Spanning tree protocols

STP, RSTP, and MSTP

DHCP

DHCP server

DHCP client

DHCP snooping

DHCP relay agent

IPv6 DHCP server

IPv6 DHCP snooping

IPv6 DHCP client

IPv6 DHCP relay

Basic IPv6 protocols

IPv6 addressing, Neighbor Discovery (ND), ICMPv6, Stateless Auto Configuration, and Path MTU Discovery

IP routing

Static routing

RIP and RIPng

OSPFv2, OSPFv3, IS-ISv4, and IS-ISv6

BGP4 and BGP4+

Equal-Cost Multi-Path (ECMP)

Packet-based and flow-based load balancing

MCE

Multicast

IGMPv1/v2/v3 and IGMP proxy

IGMPv1/v2/v3 snooping

IGMP filtering and IGMP fast leave

PIM-DM, PIM-SM, and PIM-SSM

MLD snooping and MLD

PIM for IPv6

MPLS

MPLS L3VPN

VXLAN

VXLAN Layer 2 bridge

VXLAN Layer 3 gateway

Ethernet Virtual Private Network (EVPN) VXLAN

ACL&QoS

Flexible and diversified hardware ACLs:

Standard IP ACLs (hardware ACLs based on IP addresses)

Extended IP ACLs (hardware ACLs based on IP addresses or TCP/UDP port numbers)

Extended MAC ACLs (hardware ACLs based on source MAC addresses, destination MAC addresses, and optional Ethernet type)

Time range-based ACLs

Expert-level ACLs (hardware ACLs based on flexible combinations of the VLAN ID, Ethernet type, MAC address, IP address, TCP/UDP port number, protocol type, and time range)

ACL 80

IPv6 ACL

Port traffic identification

Port traffic rate limiting

802.1p/DSCP/ToS traffic classification

Eight queues on each port

Queue scheduling: Strict Priority (SP), Deficit Round Robin (DRR), SP+DRR, and Random Early Detection (RED)/Weighted Random Early Detection (WRED)

Security

3-tuple binding (IP address, MAC address, and port)

3-tuple binding (IPv6 address, MAC address, and port)

Filtering of invalid MAC addresses

Port- and MAC address-based 802.1x authentication

MAB

Portal and Portal 2.0 authentication

ARP check

DAI

ARP packet rate limiting

Gateway ARP spoofing prevention

Broadcast storm suppression

Hierarchical management of administrators and password protection

RADIUS and TACACS+ authentication

AAA for device login management

SSH

BPDU guard

IP source guard

CPP and NFPP

Port protection

Management features

SNMP, CLI (Telnet/console), RMON, SSH, syslog, NTP/SNTP, SNMP over IPv6, IPv6 MIB support for SNMP, SSHv6, Telnetv6, FTP/TFTP v6, DNSv6, NTP for v6, Traceroute v6

sFlow, which utilizes the random sampling technology to sample flow information of traffic on a switch

Management via the public cloud platform and RG-UNC

High reliability

VSU (virtualizing multiple devices into one device) GR for RIP, OSPF, BGP, and other routing protocols BFD ERPS (G.8032) REUP RLDP 1+1 power redundancy Hot swapping of power modules

Zero-touch provisioning (ZTP)

CWMP (TR-069)