Compare Products

Hide

Clear All

VS

Home> Support> Downloads>

Ruijie RG-S6120 Series Switches RGOS 12(1)B0102 Firmware

2020-11-12 View:
Please rate this document
Feedback

How can we better meet your needs?

* This field is required.

Please leave your suggestions here.

* Please enter a validity comment.

200 characters left

If Ruijie may contact you for more details, please leave your contact information here.

* I understand and agree to Terms of Use and acknowledge Ruijie's Privacy Policy.

* This field is required.
Send Feedback

Thank you for your feedback!

Catalog

Download Options

Download
RG-S8600E Series Switch RGOS Release Notes,11.0(4)B4P3 V2.2

 

 

 

 

 

Ruijie RG-S6120Series Switches Release Notes, RGOS 12.1(2)B0102

 

 


Release Date: August 22, 2019

 

 

 

 



      Contents

This document includes the following sections:

n  Basic Information

n  Hardware Supported

n  Resolved Issues

n  Related Documentation

n  Upgrade File

n  Upgrade Steps

n  Upgrade Tips

      Basic Information

Table 1 lists the basic information of the current release.

Table 1 Basic Information of the Current Release

Current Release

S6120_RGOS 12.1(2)B0102

Previous Release

S6120_RGOS 12.1(2)

Applicable Product

RG-S6120-20XS4VS2QXS / S6120-24XMG4XS4VS-UP-E

Category

Official release

 

Use the show version command to display informationabout the software version.

Ruijie#showversion

Systemdescription      : Ruijie 10G EthernetSwitch(S6120-24XMG4XS4VS-UP-E) By Ruijie Networks

Systemstart time       : 2019-08-13 18:54:34

Systemuptime           : 0:00:24:35

Systemhardware version : 1.00

Systemsoftware version : S6120_RGOS 12.1(2)B0102

Systempatch number     : NA

Systemserial number    : 1234942570031

Systemboot version     : 1.4.3(Master) N/A(Slave)

Systemrboot version    : 1.1.4

Moduleinformation:

 Slot 0 : RG-S6120-24XMG4XS4VS-UP-E

   Hardware version    : 1.00

   Boot version        : 1.4.3(Master)N/A(Slave)

   Rboot version       : 1.1.4

   Software version    : S6120_RGOS 12.1(2)B0102

    Serialnumber       : 1234942570031

      Hardware Supported

Table 2 shows the hardware supported by the RGOS 12.1(2)B0102.

Table 2 Hardware Models

Hardware Model

Version

Description

RG-S6120-20XS4VS2QXS

1.x

Switch

RG-PA150I-F

1.x

Power module

RG-S6120-24XMG4XS4VS-UP-E

1.x

Switch

RG-PA1150P-F/RG-PA520I-P-F

1.x

Power module

 

*     The hardware version number is rounded to the first decimal place.The numeral in the second decimal place does not change the supporting release.

*     For details, see Ruijie RG-S6120 Series SwitchesHardware Installation and Reference Guide.

      Resolved Issues

N/A

      Related Documentation

n Ruijie RG-S6120 Series Switches Hardware Installation andReference Guide
This manual introduces the functional and physical features of the S6120 seriesswitches and provides the device installation steps, hardware troubleshooting,module technical specifications, and specifications and usage guidelines forcables and connectors. 

n  Ruijie RG-S6120 SeriesSwitches RGOS Configuration Guide, Release 12.1(2)B0102
This manual describes the various network protocols and their implementationprinciples for the RG-S6120 series with the detailed configuration examples.

n  Ruijie RG-S6120Series Switches RGOS Command Reference, Release 12.1(2)B0102
This manual describes the configuration commands related to the various networkprotocols supported on the RG-S6120 series switches RGOS 12.1(2)B0102 versionin detail, including the command mode, parameter description, usage guide, andconfiguration examples.

 

*     You can obtain the related documents at: http://www.ruijienetworks.com/.

      Upgrade File

Table 3 Upgrade File

Applicable Model

Upgrade Firmware

File Size

MD5

S6120-20XS4VS2QXS/S6120-24XMG4XS4VS-UP-E

S6120_RGOS12.1(2)B0102_install.bin

152,612,709 bytes

7c553a3a0a14159c5463ab083f11c984

      Upgrade Steps

1.    Upgrade MainProgram

Run the following command (x.x.x.x is the PC IP address).

Ruijie# upgradedownload tftp://x.x.x.x/ S6120_RGOS12.1(2)B0102_install.bin                  

*Nov 30 14:46:56: %UPGRADE-6-INFO: Start upgrade

*Nov 30 14:46:57: %UPGRADE-6-INFO: Copy to/tmp/vsd/0/upgrade_rep/

*Nov 30 14:46:57: %UPGRADE-6-INFO: Please wait for amoment......

Press Ctrl+C to quit

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

*Nov 30 15:10:53: %UPGRADE-6-INFO: Upgrade disable reloaddevice

*Nov 30 15:10:53: %UPGRADE-6-INFO: Upgrade disable redundancyforceswitch

Ruijie#*Nov 30 15:10:55: %UPGRADE-6-INFO: Upgrade processingis 10%

*Nov 30 15:10:57: %UPGRADE-6-INFO: Upgrade processing is 30%

*Nov 30 15:10:59: %UPGRADE-6-INFO: Upgrade check package md5value, wait a moment

*Nov 30 15:11:09: %UPGRADE-6-INFO: Upgrade processing is 60%

*Nov 30 15:12:15: %UPGRADE-6-INFO: Upgrade info [OK]

*Nov 30 15:12:15: %UPGRADE-6-INFO: Rootfs version[1.0.0.5c2a6a43->1.0.0.4ec8341a]

*Nov 30 15:12:15: %UPGRADE-6-INFO: Reload system to take effect !

*Nov 30 15:12:32: %UPGRADE-6-INFO: Upgrade enable redundancyforceswitch

*Nov 30 15:12:32: %UPGRADE-6-INFO: Upgrade enable reloaddevice

*Nov 30 15:12:32: %UPGRADE-6-INFO: Upgrade processing is 100%

*Nov 30 15:12:32: %UPGRADE-6-INFO: Upgrade finish

Reboot the device.

Ruijie#reload

Reloadsystem?(Y/N)y

*Nov30 15:16:32: %DP-3-RESET_DEV: All devices are ready to be reloaded.

*Nov30 15:16:32: %DP-3-RESET_DEV: Reset device 1 due to reload command.

*Nov30 15:16:32: %DP-3-MACHINE_RESTART: MACHINE_RESTART.

{startup}stop

[2101.368051] sysrq: SysRq :

UpgradeRootfs Success.

UpgradeSuccess

Thesystem is going down NOW!

SentSIGTERM to all processes

SentSIGKILL to all processes

Requestingsystem reboot

[ 252.140595] reboot: Restarting system

U-Boot1.4.2--gf4b0786 (Nov 01 2018 - 09:52:06 +0800)

I2C:  ready

DRAM: 1 GiB

NAND: 1024 MiB

Run the show version detail command to check theversion number.

Systemdescription      : Ruijie 10G EthernetSwitch(S6120-24XMG4XS4VS-UP-E) By Ruijie Networks

Systemstart time       : 2019-08-13 18:54:34

Systemuptime           : 0:00:24:24

Systemhardware version : 1.00

Systemsoftware version : S6120_RGOS 12.1(2)B0102

Systempatch number     : NA

Systemsoftware number  : M09570508132019

Systemserial number    : 1234942570031

Systemboot version     : 1.4.3(Master) N/A(Slave)

Systemrboot version    : 1.1.4

Systemcore version     : 4.4.39+

Moduleinformation:

 Slot 0 : RG-S6120-24XMG4XS4VS-UP-E

   Hardware version    : 1.00

   Boot version        : 1.4.3(Master)N/A(Slave)

   Rboot version       : 1.1.4

   Software version    : S6120_RGOS 12.1(2)B0102

   Software number     : M09570508132019

   Serial number       : 1234942570031

Note: The last 8 digits of the version number indicates theupgrade date.

2.    Upgrade by USB

Run the following command to upgrade the device.

Ruijie#upgrade usb0: S6120_RGOS12.1(2)B0102_install.bin

*Nov30 17:25:36: %UPGRADE-6-INFO: Start upgrade

Ruijie#*Nov30 17:25:37: %UPGRADE-6-INFO: Upgrade disable reload device

*Nov30 17:25:37: %UPGRADE-6-INFO: Upgrade disable redundancy forceswitch

*Nov30 17:25:39: %UPGRADE-6-INFO: Upgrade processing is 10%

*Nov30 17:25:41: %UPGRADE-6-INFO: Upgrade processing is 30%

*Nov30 17:25:43: %UPGRADE-6-INFO: Upgrade check package md5 value, wait a moment

*Nov30 17:26:02: %UPGRADE-6-INFO: Upgrade processing is 60%

*Nov30 17:26:57: %UPGRADE-6-INFO: Reload system to take effect !

Ruijie#*Nov30 17:27:37: %UPGRADE-6-INFO: Upgrade enable redundancy forceswitch

*Nov30 17:27:37: %UPGRADE-6-INFO: Upgrade enable reload device

*Nov30 17:27:37: %UPGRADE-6-INFO: Upgrade processing is 100%

*Nov30 17:27:37: %UPGRADE-6-INFO: Upgrade finish

Runthe following command to check upgrade status.

Ruijie#showupgrade status

upgradeglobal status: UPGRADING

[Slot0]

       Device type     : s6120

       Status          : upgrading

Reboot the device.

Ruijie#reload

Reloadsystem?(Y/N)y

*Nov30 15:16:32: %DP-3-RESET_DEV: All devices are ready to be reloaded.

*Nov30 15:16:32: %DP-3-RESET_DEV: Reset device 1 due to reload command.

*Nov30 15:16:32: %DP-3-MACHINE_RESTART: MACHINE_RESTART.

{startup}stop

[2101.368051] sysrq: SysRq :

UpgradeRootfs Success.

UpgradeSuccess

Thesystem is going down NOW!

SentSIGTERM to all processes

SentSIGKILL to all processes

Requestingsystem reboot

[ 252.140595] reboot: Restarting system

U-Boot1.4.2--gf4b0786 (Nov 01 2018 - 09:52:06 +0800)

I2C:  ready

DRAM: 1 GiB

NAND: 1024 MiB

LoadingEnvironment from SPI Flash... SF: Detected s25fl128s_64k with page size 256Bytes, erase size 64 KiB, total 16 MiB

Run the following command to check the version number.

Systemdescription      : Ruijie 10G EthernetSwitch(S6120-24XMG4XS4VS-UP-E) By Ruijie Networks

Systemstart time       : 2019-08-13 18:54:34

Systemuptime           : 0:00:24:24

Systemhardware version : 1.00

Systemsoftware version : S6120_RGOS 12.1(2)B0102

Systempatch number     : NA

Systemsoftware number  : M09570508132019

Systemserial number    : 1234942570031

Systemboot version     : 1.4.3(Master) N/A(Slave)

Systemrboot version    : 1.1.4

Systemcore version     : 4.4.39+

Moduleinformation:

 Slot 0 : RG-S6120-24XMG4XS4VS-UP-E

   Hardware version    : 1.00

   Boot version        : 1.4.3(Master)N/A(Slave)

   Rboot version       : 1.1.4

   Software version    : S6120_RGOS 12.1(2)B0102

   Software number     : M09570508132019

   Serial number       : 1234942570031

Note: The last 8 digits of the version number indicates theupgrade date.

3.    Upgrade by Uboot

Run the following command.

Ruijie#@@@@b

[ 645.397118] IRQ RESPONSES

 [ 645.397141] Please change 5@ to

U-Boot1.4.2--gf4b0786 (Nov 01 2018 - 09:52:06 +0800)

I2C:  ready

DRAM: 1 GiB

NAND: 1024 MiB

LoadingEnvironment from SPI Flash... SF: Detected s25fl128s_64k with page size 256Bytes, erase size 64 KiB, total 16 MiB

OK

PressCtrl + C to enter the Rboot menu after this message is displayed.

PressCtrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

 [   0.000164] timer_base:0x18006020 gpio_base:01800a000 irq:0x12 clk:ef010580apb_clk_rate:0x2540be40.

 [   0.106514] genirq: Flags mismatch irq 39. 00000400 (IDM) vs. 00000400 (IDM)

 [   1.967311] TIPC: Activated (version 2.0.0)

 [   2.018661] TIPC: Started in single node mode

startingpid 509, tty '': '-/etc/sysinit'

Saveproduct info success.

UBIdevice number 0, total 4000 LEBs (507904000 bytes, 484.4 MiB), available 0 LEBs(0 bytes), LEB size 126976 bytes (124.0 KiB)

UBIdevice number 1, total 3887 LEBs (493555712 bytes, 470.7 MiB), available 0 LEBs(0 bytes), LEB size 126976 bytes (124.0 KiB)

startingpid 818, tty '': '/etc/upgrade'

startingpid 830, tty '': '-/etc/menu/menu_init'

======Rboot Menu(Ctrl+Z to upper level) ======

   TOP menu items.

************************************************

   0. Tftp utilities.

   1. XModem utilities.

   2. Run main.

   3. SetMac utilities.

   4. Scattered utilities.

************************************************

Selectthe options in red as shown in the following figure.

======Rboot Menu(Ctrl+Z to upper level) ======

   TOP menu items.

************************************************

   0. Tftp utilities.

   1. XModem utilities.

   2. Run main.

   3. SetMac utilities.

   4. Scattered utilities.

************************************************

Pressa key to run the command:

======Rboot Menu(Ctrl+Z to upper level) ======

  Tftp utilities.

************************************************

  0. Upgrade uboot program.

  1. Upgrade rboot program.

   2. Upgrade main program.

  3. Burn the total FlashROM by this downloaded file.

************************************************

Pressa key to run the command: 

enterthe Local IP:[]:

Enterthe switch IP address, PC IP address and BIN file name.

************************************************

Pressa key to run the command: 

enterthe Local IP:[]:192.12.1.1    

enterthe Remote IP:[]:192.12.1.2 

enterthe Filename:[]:S6120_RGOS12.1(2)B0102_install.bin 

Upgrade the device.

%Total    % Received % Xferd  Average Speed  Time    Time     Time  Current

Dload Upload   Total   Spent    Left  Speed

147M 100  147M    0     0 1902k      0  0:01:19  0:01:19 --:--:--1968k

100 147M  100  147M    0     0 1902k      0  0:01:19  0:01:19 --:--:--1902k

Upgrading,keep power on and wait please ...

Press Y and the “Upgrade Success” message willbe displayed.

Determinedto upgrade? [Y/N]: Y

MountFile System ...

Copyfile to Flash ...

UpgradeRootfs Success.

UpgradeSuccess

Thedevice returns to the Rboot menu after upgrade succeeds. Press Ctrl +Ato exit and reboot the device (or power off the device and reboot it).

======Rboot Menu(Ctrl+Zto upper level) ======

Tftputilities.

************************************************

0.Upgrade uboot program.

1.Upgrade rboot program.

2.Upgrade main program.

3.Burn the total FlashROM by this downloaded file.

************************************************

Pressa key to run the command:

======Rboot Menu(Ctrl+Z to upper level) ======

TOPmenu items.

************************************************

0.Tftp utilities.

1.XModem utilities.

2.Run main.

3.SetMac utilities.

4.Scattered utilities.

************************************************

Wait for the device to reboot.

*Nov30 15:16:32: %DP-3-RESET_DEV: All devices are ready to be reloaded.

*Nov30 15:16:32: %DP-3-RESET_DEV: Reset device 1 due to reload command.

*Nov30 15:16:32: %DP-3-MACHINE_RESTART: MACHINE_RESTART.

{startup}stop

[2101.368051] sysrq: SysRq :

UpgradeRootfs Success.

UpgradeSuccess

Thesystem is going down NOW!

SentSIGTERM to all processes

SentSIGKILL to all processes

Requestingsystem reboot

[ 252.140595] reboot: Restarting system

U-Boot1.4.2--gf4b0786 (Nov 01 2018 - 09:52:06 +0800)

I2C:  ready

DRAM: 1 GiB

NAND: 1024 MiB

LoadingEnvironment from SPI Flash... SF: Detected s25fl128s_64k with page size 256Bytes, erase size 64 KiB, total 16 MiB

OK

Boot:  Master

PressCtrl+B to enter Boot Menu, Press Ctrl+C to enter Rboot  0

ubi0:attaching mtd2

Runthe following command to check the version number.

Systemdescription      : Ruijie 10G EthernetSwitch(S6120-24XMG4XS4VS-UP-E) By Ruijie Networks

Systemstart time       : 2019-08-13 18:54:34

Systemuptime           : 0:00:24:24

Systemhardware version : 1.00

Systemsoftware version : S6120_RGOS 12.1(2)B0102

Systempatch number     : NA

Systemsoftware number  : M09570508132019

Systemserial number    : 1234942570031

Systemboot version     : 1.4.3(Master) N/A(Slave)

Systemrboot version    : 1.1.4

Systemcore version     : 4.4.39+

Moduleinformation:

 Slot 0 : RG-S6120-24XMG4XS4VS-UP-E

   Hardware version    : 1.00

   Boot version        : 1.4.3(Master)N/A(Slave)

   Rboot version       : 1.1.4

   Software version    : S6120_RGOS 12.1(2)B0102

   Software number     : M09570508132019

   Serial number       : 1234942570031

Note: The last 8 digits of the version number indicates theupgrade date.

      Upgrade Tips

The following are some tips for upgrading the RG-S6120 SeriesSwitches RGOS 12.1(2)B0102:

n  Space requirements: 1GB flash & 1,024 MB memory.

n  During the upgradeand downgrade, pay attention to the prompt messages. If failures occur, pleasesave the log and contact us for technical assistance.

n  During the upgradeand downgrade, it is recommended you not power off or reset the system, orplug/unplug any module.

n  Use the showversion command to check the firmware after the upgrade.

Ruijie Networks websites use cookies to deliver and improve the website experience.

See our cookie policy for further details on how we use cookies and how to change your cookie settings.

Accept All

Manage Cookies

Cookie Manager

When you visit any website, the website will store or retrieve the information on your browser. This process is mostly in the form of cookies. Such information may involve your personal information, preferences or equipment, and is mainly used to enable the website to provide services in accordance with your expectations. Such information usually does not directly identify your personal information, but it can provide you with a more personalized network experience. We fully respect your privacy, so you can choose not to allow certain types of cookies. You only need to click on the names of different cookie categories to learn more and change the default settings. However, blocking certain types of cookies may affect your website experience and the services we can provide you.

  • Performance cookies

    Through this type of cookie, we can count website visits and traffic sources in order to evaluate and improve the performance of our website. This type of cookie can also help us understand the popularity of the page and the activity of visitors on the site. All information collected by such cookies will be aggregated to ensure the anonymity of the information. If you do not allow such cookies, we will have no way of knowing when you visited our website, and we will not be able to monitor website performance.

  • Essential cookies

    This type of cookie is necessary for the normal operation of the website and cannot be turned off in our system. Usually, they are only set for the actions you do, which are equivalent to service requests, such as setting your privacy preferences, logging in, or filling out forms. You can set your browser to block or remind you of such cookies, but certain functions of the website will not be available. Such cookies do not store any personally identifiable information.

Accept All

View Cookie Policy Details

Contact Us

Contact Us

How can we help you?

Contact Us

Get an Order help

Contact Us

Get a tech support